doc/install: Keep the name field of the created user consistent with the node name in the Start RADOSGW service command
If the user name does not match the name of the node that started the RADOSGW service, this will cause confusion for those who are new to ceph. Because they can't start the radosgw service normally as shown in the tutorial.
doc/rados: add "pgs not deep scrubbed in time" info
Add a procedure to doc/rados/operations/health-warnings.rst that
explains how to remedy the "X PGs not deep-scrubbed in time" health
warning.
This procedure was developed by Eugen Block, and is at the time of this
commit available on his blog at
https://heiterbiswolkig.blogs.nde.ag/2024/09/06/pgs-not-deep-scrubbed-in-time/
Edit the section "bluefs-bdev-migrate" in
doc/man/8/ceph-bluestore-tool.rst to add the information that this
operation expands the target storage by updating its size label, making
"bluefs-bdev-expand" unnecessary.
Improve the subject-verb agreement in this section, and supply some
absent definite articles.
Co-authored-by: Peter Gervai <grin@drop.grin.hu> Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 6b34707f827b2b197f53fe2e430d173b30b81401)
Kefu Chai [Tue, 13 Aug 2024 22:37:57 +0000 (06:37 +0800)]
ceph-volume: add "packaging" to install_requires
in 0985e201, "packaging" was introduced as a runtime dependency of
ceph-volume, and `ceph.spec.in` was updated accordingly to note
this new dependency. but the debian packaging was not updated.
in 80edcd40, the missing dependency was added to debian/control as
one of ceph-volume's runtime dependency.
but dh_python3 is able to figure out the dependencies by reading
the egg's metadata of the ceph-volume python module. and as a
python project, ceph-volume is using its `setup.py` for
tracking its dependencies.
so in order to be more consistent, and keep all of its dependencies
in one place, let's move this dependency to setup.py . as the
packagings in both distros are able to figure the dependencies
from egg-info.
see also
- https://manpages.debian.org/testing/dh-python/dh_python3.1.en.html#dependencies
- https://docs.fedoraproject.org/en-US/packaging-guidelines/Python_201x/#_automatically_generated_dependencies
Thomas Lamprecht [Wed, 31 Jul 2024 07:48:08 +0000 (09:48 +0200)]
debian pkg: record python3-packaging dependency for ceph-volume
Since commit 0985e201342 ("ceph-volume: use 'no workqueue' options
with dmcrypt") the python "packaging" module is used to parse the
cryptsetup version output, but the debian packaging was not updated to
record that new dependency.
So simply record this in the d/control file, adding a <pkg>.requires
file seemed to not really winning us anything here.
Fixes: https://tracker.ceph.com/issues/67290 Fixes: 0985e201342fa53c014a811156aed661b4b8f994 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 80edcd40e8092d9fb3b45c1a6c7f9b7f4f37b69e)
Ilya Dryomov [Fri, 30 Aug 2024 12:00:44 +0000 (14:00 +0200)]
rbd: mention namespace in "rbd mirror pool" command descriptions
Commit 5e64748927d0 ("doc/rbd: add namespace information for mirror
commands") did this for the man page, update the built-in help as well.
The "by default" bit in the description of "rbd mirror pool enable" and
"rbd mirror pool disable" commands is specific to pool mode which is in
turn specific to journal-based mirroring, so it's removed.
Make it clearer that, despite a full image or group spec being taken
for source and destination, an image or a group can be renamed only
within its pool or namespace.
Rename across pools or namespaces within the same pool is unsupported.
Zac Dover [Fri, 30 Aug 2024 11:16:57 +0000 (21:16 +1000)]
doc/ceph-volume: add spillover fix procedure
Add a procedure that explains how, after an upgrade, to move bytes that
have spilled over to a relatively slow device back to the faster device.
This procedure was developed by Chris Dunlop on the [ceph-users] mailing
list, here: https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/message/POPUFSZGXR3P2RPYPJ4WJ4HGHZ3QESF6/
Eugen Block requested the addition of this procedure to the
documentation on 30 Aug 2024.
Co-authored-by: Anthony D'Atri <anthony.datri@gmail.com> Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 98618aaa1c8b786c7d240a210b62cc737fdb048d)
Adam King [Thu, 2 May 2024 17:35:41 +0000 (13:35 -0400)]
mgr/cephadm: make SMB and NVMEoF upgrade last in staggered upgrade
This needs to happen as some work on the NVMEoF side (still unmerged
as of writing this) will make the NVMEoF daemon dependent on the mon.
Prior to this patch, in a staggered upgrade, all daemons not using the
ceph image were upgraded after the mgr since we typically only care
about the default image changing or potential changes to how we handle
our systemd units which only needs the mgr to be upgraded to be applied.
This NVMEoF dependency on the mon changes this and we can no longer
upgrade it directly after the mgr. This patch changes it so the NVMEoF
daemon is instead upgraded after all ceph image daemons have been
upgraded in a staggered upgrade scenario. Non-staggered upgrades
are unaffected as the NVMEoF daemon was already upgraded near the
end in that scenario. The SMB dameon has no reason it needs to be
upgraded later, but it's in the (small) pool of daemons that don't
use the ceph image and aren't for monitoring, so it's been affected
by this as well.
NOTE: This is a bit of an ugly patch imo and shows that a refactoring
of the upgrade code is likely required. Hopefully this patch is more
of a stopgap until that larger effort can be made
John Mulligan [Wed, 27 Mar 2024 22:45:15 +0000 (18:45 -0400)]
cephadm: fix host-maintenance command always exiting with a failure
The host-maintenance command would always fail because
command_maintenance always returns a string. This string is passed to
sys.exit and thus always gets printed and causes a non-zero exit code.
Fix the command line behavior by renaming the original function and
adding a new command_maintenance that prints the string and returns an
int like other command_* functions do.
Fixes: https://tracker.ceph.com/issues/65122 Signed-off-by: John Mulligan <jmulligan@redhat.com>
(cherry picked from commit 0a137b140e47d02b03d133adb55e62aa0de7b984)
Adam King [Thu, 4 Apr 2024 18:11:11 +0000 (14:11 -0400)]
mgr/cephadm: make client-keyring deploying ceph.conf optional
There are cases where users would like to manage their own
ceph.conf but still have cephadm deploy the client keyrings,
so this is being added to facilitate that.
Zac Dover [Sat, 17 Aug 2024 03:37:58 +0000 (13:37 +1000)]
doc/cephfs: s/mountpoint/mount point/
Change the string "mountpoint" to "mount point" in English-language
strings (as opposed to in commands, where the string "mountpoint"
sometimes appears and is correct).
cf. https://github.com/ceph/ceph/pull/58908#discussion_r1697715486
in which page 345 of The IBM Style Guide is referenced to back up this
change.
Zac Dover [Sat, 17 Aug 2024 03:44:30 +0000 (13:44 +1000)]
doc/cephfs: s/mountpoint/mount point/
Change the string "mountpoint" to "mount point" in English-language
strings (as opposed to in commands, where the string "mountpoint"
sometimes appears and is correct).
cf. https://github.com/ceph/ceph/pull/58908#discussion_r1697715486 in
which page 345 of The IBM Style Guide is referenced to back up this
change.
This commit alters only English-language text and example commands in
which the string "{mount point}" is meant to be replaced. No commands
meant for cutting-and-pasting have been altered in this commit.
Failed the test in EC Pool configuration because PGs are
not going into active+clean (our fault for over thrashing and checking the wrong thing).
Also, PG would not go into active because we thrash below min_size
in an EC pool config, not enough shards in the acting set.
Therefore, failed the wait_for_recovery check.
Moreover, When we revive osds, we didn't add the osd back in the cluster,
this messes up true count for live_osds in the test.
Solution:
Instead of randomly choosing OSDs to thrash,
we randomly select a PG from each pool and
thrash the OSDs in the PG's acting set until
we reach min_size, then we check to see if the
PG is still active. After that we revive all
the OSDs to see if the PG recovered cleanly.
We removed some of the unnecessary part such
as `min_dead`, `min_live`, `min_out` and etc.
Also, we refractored the part of where we are
assigning k,m for the EC pools so that we get
better code readablility.
projects / ceph.git / log