qa/rbd/iscsi: ignore MON_DOWN warning in logs

These seem to be popping up very briefly and don't
appear to be relevant to what is being tested

Signed-off-by: Adam King <adking@redhat.com>
(cherry picked from commit 3b2064e7066fa58e0d812e85a293f74401d295f4)

Merge pull request #59443 from kamoltat/wip-67720-squid

squid: src/pybind/mgr/pg_autoscaler/module.py: fix 'pg_autoscale_mode' output

Merge pull request #62924 from kamoltat/wip-71028-squid

squid: mon: Track and process pending pings after election

Merge pull request #63024 from kamoltat/wip-71091-squid

squid: HealthMonitor: Add topology-aware netsplit detection and warning

Merge pull request #63804 from badone/wip-tracker-70645-mon_memory_target-fix-squid

Squid: OSDMonitor: Make sure pcm is initialised

Merge pull request #64547 from zdover23/wip-doc-2025-07-17-backport-64532-to-squid

squid: doc/radosgw: edit "Lifecycle Settings"

doc/radosgw: edit "Lifecycle Settings"

Edit the section "Lifecycle Settings" in the file
doc/radosgw/config-ref.rst. Remove solecisms and pleonasms and plain old
infelicitious formulations.

Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit ac2e5f502523d1bf326303e904ccb47236c81fcb)

Merge pull request #64530 from zdover23/wip-doc-2025-07-16-backport-64433-to-squid

squid: doc: update mgr modules notify_types

Merge pull request #63809 from zdover23/wip-doc-2025-06-09-backport-63781-to-squid

squid: doc/mgr: edit telemetry.rst

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

doc: update mgr modules notify_types

Signed-off-by: Nitzan Mordechai <nmordec@redhat.com>
(cherry picked from commit fc4396d6280fcbf0a95567cff144052d81dcd964)

Merge pull request #64496 from zdover23/wip-doc-2025-07-15-backport-63877-to-squid

squid: doc/rados/ops: edit cache-tiering.rst

doc/rados/ops: edit cache-tiering.rst

Add material to doc/rados/operations/cache-tiering.rst, as suggested by
Anthony D'Atri in
https://github.com/ceph/ceph/pull/63745#discussion_r2127887785.

Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit d3c46820a5fc72391ef46ab4b03bbe867e0e51d2)

Merge pull request #64357 from mkogan1/wip-71957-squid

squid: rgw: allow specifying ssl certificate for radosgw-admin operations

Merge pull request #64202 from ideepika/wip-71152-squid

squid: rgw: make keystone work without admin token(service ac requirement)

Merge pull request #64492 from zdover23/wip-doc-2025-07-15-backport-64483-to-squid

squid: doc: add note admonitions in two files

doc: add note admonitions in two files

Add note admonitions when discussing client package support in the
context of OS Recommendations in the following two files:

- doc/cephfs/ceph-dokan.rst
- doc/rbd/rbd-windows.rst

This addresses a change requested by Ilya Dryomov in
https://github.com/ceph/ceph/pull/64374#discussion_r2199756581.

Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 69d641f0207d803cd9a3c3e102d5b2073e6b0f77)

Merge pull request #64313 from ivancich/wip-69408-squid

squid: rgw: fix empty storage class on display of multipart uploads

Reviewed-by: Adam C. Emerson <aemerson@redhat.com>

Merge pull request #64481 from zdover23/wip-doc-2025-07-15-backport-64374-to-squid

squid: doc: Clarify the status of MS Windows client support

doc: Clarify the status of MS Windows client support

Signed-off-by: Anthony D'Atri <anthonyeleven@users.noreply.github.com>
(cherry picked from commit 89eabfc3f0c8db3501b3ea3097e2983617c5234a)

Merge pull request #64472 from zdover23/wip-doc-2025-07-14-backport-64462-to-squid

squid: doc/cephfs: Improve mount-using-fuse.rst

Merge pull request #64475 from zdover23/wip-doc-2025-07-14-backport-63080-to-squid

squid: doc/radosgw: Improve rgw-cache.rst

doc/radosgw: Improve rgw-cache.rst

Try to improve the language by completely rewriting some sentences.
Attempt to format the document more like the rest of the docs.
Fix several errors in punctuation, capitalization, spaces etc.
Use blocks with bash prompts for CLI commands instead of hardcoded
prompts.
Fix section hierarchy and section title underline lengths.
Use admonition.

Signed-off-by: Ville Ojamo <14869000+bluikko@users.noreply.github.com>
(cherry picked from commit 6e836f8f1e1e53bc7f8d8b497960b100e6b625d6)

doc/cephfs: Improve mount-using-fuse.rst

Signed-off-by: Anthony D'Atri <anthonyeleven@users.noreply.github.com>
(cherry picked from commit 329ee7b3038e49cf0def2f2628444e3e90796c05)

Merge pull request #64387 from cbodley/wip-72026-squid

squid: rgw: don't use merge_and_store_attrs() when recreating a bucket

Merge pull request #64269 from zdover23/wip-doc-2025-06-30-backport-64164-to-squid

squid: mgr/dashboard: Fix inline markup warning in API documentation

Reviewed-by: Afreen Misbah <afreen@ibm.com>

Merge pull request #64086 from adk3798/wip-69514-squid

squid: mgr/cephadm: mgr orchestrator module raise exception if there is trailing tab in yaml file

Reviewed-by: Redouane Kachach <rkachach@ibm.com>

Merge pull request #59829 from joscollin/wip-68108-squid

squid: qa: multiple fixes in test_mirroring.py

Reviewed-by: Venky Shankar <vshankar@redhat.com>

Merge pull request #62115 from joscollin/wip-70285-squid

squid: cephfs-journal-tool: fix segfault during 'journal import' from invalid dump file

Reviewed-by: Venky Shankar <vshankar@redhat.com>

Merge pull request #64166 from zdover23/wip-doc-2025-06-25-backport-64160-to-squid

squid: doc/dev/config: Document how to use :confval: directive for config op…

Merge pull request #64396 from zdover23/wip-doc-2025-07-09-backport-64161-to-squid

squid: doc: Document ceph-mgr module configuration options

doc: Document ceph-mgr module configuration options

Add comprehensive documentation for defining configuration options in
ceph-mgr modules, including all supported properties and their usage.

Previously, the documentation did not explain how to define ceph-mgr
module configuration options, despite subtle differences from other Ceph
components. This change documents all supported Option properties, their
types, and provides clear examples to help module developers properly
configure their options.

Signed-off-by: Kefu Chai <tchaikov@gmail.com>
(cherry picked from commit 121192f4c95df0ee282cecc7237c8ca788e9cfba)

Merge pull request #61774 from joscollin/wip-69927-squid

squid: cephfs-top: exception when terminal size greater than PAD_WIDTH

Reviewed-by: Venky Shankar <vshankar@redhat.com>

Merge pull request #64393 from zdover23/wip-doc-2025-07-09-backport-64334-to-squid

squid: doc/rados: remove clonedata command

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #64217 from zdover23/wip-doc-2025-06-27-backport-62944-to-squid

squid: common/options: fix typo in description

doc/mgr: edit telemetry.rst

Edit doc/mgr/telemetry.rst.

Incorporate Anthony D'Atri's suggestions from
https://github.com/ceph/ceph/pull/63739.

Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit ac7f757db7b3644761a2295cfe5e1a9a55319f72)

doc/rados: remove clonedata command

Remove the "clonedata" command from the rados manpage.

The "clonedata" command was removed in
https://github.com/ceph/ceph/pull/13008.

Fixes: https://tracker.ceph.com/issues/71943
Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 1eff1c1147bdb683701a55fbe3ea846fde6937f0)

rgw: don't use merge_and_store_attrs() when recreating a bucket

https://github.com/ceph/ceph/pull/56583 recently fixed
merge_and_store_attrs() to preserve existing attrs, but this broke the
swift api's ability to remove container metadata. RGWCreateBucket
handles this merging itself with prepare_add_del_attrs(), so we should
just assign createparams.attrs to the bucket and store it with
bucket->put_info()

make the same change for RGWPutMetadataBucket which swift uses to
add/remove existing metadata

Fixes: https://tracker.ceph.com/issues/69301
Signed-off-by: Casey Bodley <cbodley@redhat.com>
(cherry picked from commit 340e353de6882dcd6e327d6691da9ef2b767ab4f)

Merge pull request #64084 from adk3798/wip-69712-squid

squid: cephadm: rgw: allow specifying the ssl_certificate by filepath

Reviewed-by: Redouane Kachach <rkachach@ibm.com>

rgw: allow specifying ssl certificate for radosgw-admin operations

for example

../src/mrun c2 radosgw-admin realm pull --url=https://localhost:1443 --access-key a2345678901234567890 --secret a234567890123456789012345678901234567890 --default --rgw_verify_ssl_cacert=./cert.pem

../src/mrun c2 radosgw-admin period pull --url=https://localhost:1443 --access-key a2345678901234567890 --secret a234567890123456789012345678901234567890 --default --rgw_verify_ssl_cacert=./cert.pem

../src/mrun c2 radosgw-admin period update --commit --rgw_verify_ssl_cacert=./cert.pem

../src/mrun c2 radosgw-admin sync status --rgw_verify_ssl_cacert=./cert.pem

fixes: https://tracker.ceph.com/issues/53588

Signed-off-by: Mark Kogan <mkogan@redhat.com>
(cherry picked from commit 7c7633bb6795b410974dc3a61cdc162bfaf15e52)

Merge pull request #64343 from zdover23/wip-doc-2025-07-04-backport-63779-to-squid

squid: doc/mgr: edit telemetry.rst

Merge pull request #63981 from cbodley/wip-71691-squid

squid: test/common: unittest_fault_injector omits unit-main target

Reviewed-by: Adam C. Emerson <aemerson@redhat.com>

Merge pull request #64338 from zdover23/wip-doc-2025-07-03-backport-64319-to-squid

squid: doc/radosgw: add rgw_enable_lc_threads & rgw_enable_gc_threads

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

doc/mgr: edit telemetry.rst

Edit doc/mgr/telemetry.rst.

Incorporate the suggestions made by Anthony D'Atri in
https://github.com/ceph/ceph/pull/63735.

Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 97ef126e4b6a9dcdf9872cf37cdebec289e84acd)

Merge pull request #64321 from zdover23/wip-doc-2025-07-03-backport-64306-to-squid

squid: doc/rados/ops: add caps restore command

doc/radosgw: add rgw_enable_lc_threads & rgw_enable_gc_threads

Add rgw_enable_lc_threads and rgw_enable_gc_threads to
doc/radosgw/config-ref.rst.

Fixes: https://tracker.ceph.com/issues/58092
Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 45e5468ea7fc57b1cb60f1936558dc2678adc6fd)

Merge pull request #59880 from adk3798/squid-cephadm-nvmeof-allow-passing-group

squid: mgr/orchestrator: allow passing group to apply/add nvmeof commands

Reviewed-by: John Mulligan <jmulligan@redhat.com>

Merge pull request #63115 from adk3798/squid-nfs-export-parse-sectype

squid: mgr/nfs: make sure sectype is a list when parsed

Reviewed-by: Redouane Kachach <rkachach@ibm.com>
Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

Merge pull request #64082 from adk3798/wip-68583-squid

squid: cephadm: add ability to continue on failure when applying multiple specs

Reviewed-by: Redouane Kachach <rkachach@ibm.com>
Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

doc/rados/ops: add caps restore command

Add a command that restores caps to client.admin after they have been
accidentally destroyed or removed.

Fixes: https://tracker.ceph.com/issues/23594
Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit de8c148a2f99db3a1dc4eb70a19aca19a0e9bacf)

Merge pull request #64315 from zdover23/wip-doc-2025-07-03-backport-63359-to-squid

squid: doc/radosgw/s3: Document delete-if-unmodified-since

Merge pull request #62612 from zdover23/wip-doc-2025-04-02-backport-62610-to-squid

squid: doc/dev/release-process.rst: document new Jenkins job for containers

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

doc/radosgw/s3: Document delete-if-unmodified-since

Signed-off-by: Anthony D'Atri <anthonyeleven@users.noreply.github.com>
(cherry picked from commit 3381041d190fd48cf9f6d53f679f1737028cccf4)
(cherry picked from commit 7e2bd1595d64c12e1959cc29acfaf906a9027fc6)

Merge pull request #63812 from zdover23/wip-doc-2025-06-09-backport-63782-to-squid

squid: doc/radosgw: edit metrics.rst

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #62551 from zdover23/wip-doc-2025-03-28-backport-62537-to-squid

squid: src/common: add guidance for mon_warn_pg_not_scrubbed

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

rgw: fix empty storage class on display of multipart uploads

Some multipart uploads do not have a stored storage class, however the
code is written such that an empty storage class is treated as the
"STANDARD" storage class. So when encoding the storage class in JSON,
use the canonical storage.

Signed-off-by: J. Eric Ivancich <ivancich@redhat.com>
(cherry picked from commit eab096c188d2430ccc3e865b614b845f1a92af08)

doc/radosgw: edit metrics.rst

Edit doc/radosgw/metrics.rst.

Incorporate Anthony D'Atri's suggestion from
https://github.com/ceph/ceph/pull/62893#discussion_r2124662981 into the
RADOSGW documentation.

This commit clarifies the English that explains the behavior of
rgw-multitenancy.

Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit c7e49b85997369c5c29fb64da89fa676cb84e989)

Merge pull request #64147 from zdover23/wip-doc-2025-06-25-backport-64088-to-squid

squid: doc: Fixed a spelling error.

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #64284 from zdover23/wip-doc-2025-07-01-backport-64239-to-squid

squid: doc/mgr/crash.rst: remove outdated module enabling instructions

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #64287 from zdover23/wip-doc-2025-07-01-backport-64255-to-squid

squid: doc/rados/configuration: Small improvements in ceph-conf.rst

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #64170 from zdover23/wip-doc-2025-06-25-backport-64163-to-squid

squid: doc: Fix unterminated inline literal in ceph-conf.rst

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #60360 from adk3798/squid-ganesha-set-io-flusher-fail-true

squid: mgr/cephadm: add "allow_set_io_flusher_fail = true;" to ganesha conf

Reviewed-by: John Mulligan <jmulligan@redhat.com>

Merge pull request #59932 from adk3798/wip-68138-squid

squid: mgr/cephadm: open ceph-exporter when firewalld is enabled

Reviewed-by: Avan Thakkar <athakkar@redhat.com>
Reviewed-by: John Mulligan <jmulligan@redhat.com>

Merge pull request #63567 from cbodley/wip-70374-squid

squid: rgw: trigger resharding of versioned buckets sooner

Reviewed-by: J. Eric Ivancich <ivancich@redhat.com>

Merge pull request #64081 from adk3798/wip-67499-squid

squid: mgr/nfs: scrape nfs monitoring endpoint

Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

Merge pull request #62593 from adk3798/squid-cephadm-sidecar-redeploy

squid: cephadm: stop sidecar systemd units when restarting main units

Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

Merge pull request #61905 from adk3798/squid-stop-orch-on-cleanup

squid: qa/cephadm: stop cephadm mgr module during cleanup

Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

Merge pull request #61902 from adk3798/squid-cephadm-fix-vrrp-typo

squid: mgr/cephadm: fix typo with vrrp_interfaces in keepalive setup

Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

Merge pull request #61350 from adk3798/squid-cephadm-rgw-no-multisite-traffic

squid: mgr/cephadm: allow disabling rgw_run_sync_thread through spec

Reviewed-by: Anthony D'Atri <anthonyeleven@users.noreply.github.com>
Reviewed-by: Shweta Bhosale <Shweta.Bhosale1@ibm.com>

doc/rados/configuration: Small improvements in ceph-conf.rst

Fix a missing space typo.

Use title case in section titles.

Use ref for hyperlink to a section that already has a label instead of
linking to title text of the section.

Use privileged command prompt for all ceph commands except ceph commands
that invoke help.

Use INI preformatted block for last remaining block that was just using
plain preformatted.

Signed-off-by: Ville Ojamo <14869000+bluikko@users.noreply.github.com>
(cherry picked from commit 6687c9767d9764f34d7099ba6980992dd8ae8737)

doc/mgr/crash.rst: remove outdated module enabling instructions

The crash module has been enabled by default since commit 18f253aa in
Nautilus and is now in the always_on_modules list. However, the
documentation still contained instructions for manually enabling it.

When users followed these outdated instructions, they encountered:
```
  module 'crash' is already enabled (always-on)
```

The module cannot be disabled either. Running:
```
  ceph mgr module disable crash
```

Returns the error:
```
  Error EINVAL: module 'crash' cannot be disabled (always-on)
```
In this change, we remove the obsolete enabling instructions and clarify
that this module is always active and cannot be disabled.

Signed-off-by: Kefu Chai <tchaikov@gmail.com>
(cherry picked from commit 0fcd7677586f7edf3eb091420a8ace0c4f887167)

Merge pull request #64227 from adamemerson/wip-71577-squid

squid: qa/rgw: fix perl tests missing Amazon::S3 module

Reviewed-by: Casey Bodley <cbodley@redhat.com>
Reviewed-by: Mark Kogan <mkogan@redhat.com>

mgr/dashboard: Fix inline markup warning in API documentation

Remove trailing space from summary field that was causing Sphinx build
warning.

Sphinx was generating a warning due to malformed inline markup:

```
/home/kefu/dev/ceph/doc/mgr/ceph_api/index.rst:3349: WARNING: Inline strong start-string without end-string.`
```

The openapi directive appears to convert trailing spaces into asterisk
markers, creating unterminated strong markup. This change removes the
trailing space to eliminate the warning and maintain consistency with
other entries in the file.

Signed-off-by: Kefu Chai <tchaikov@gmail.com>
(cherry picked from commit 5f1dc9af57b0398c33226410f801d16feed823f2)

qa/rgw: fix perl tests missing Amazon::S3 module

and a second case where perl tests can fail without error output

1. fix errors like: `Can't locate Amazon/S3.pm in @INC (you may need to
   install the Amazon::S3 module)`
by priming the perl tests with installing the Amazon::S3 module from cpan

ex:
```
2025-06-23T19:18:40.162 INFO:tasks.workunit.client.0.smithi090.stderr:Can't locate Amazon/S3.pm in @INC (you may need to install the Amazon::S3 module) (@INC contains: /usr/local/lib64/perl5/5.32 ...
```

2. log an error when RGW process is not detected

Fixes: https://tracker.ceph.com/issues/71577
Signed-off-by: Mark Kogan <mkogan@redhat.com>
(cherry picked from commit 7faa23f160c9f4b40d25fe27f2345dbf999b0c84)

Conflicts:
qa/suites/rgw/multifs/0-install.yaml
 - Doesn't exist in this branch, or support for it, so duplicated in
   individual tests.
qa/suites/rgw/multifs/tasks/rgw_bucket_quota.yaml
qa/suites/rgw/multifs/tasks/rgw_multipart_upload.yaml
qa/suites/rgw/multifs/tasks/rgw_user_quota.yaml
 - Has overrides no longer needed in main

Fixes: https://tracker.ceph.com/issues/71873
Signed-off-by: Adam C. Emerson <aemerson@redhat.com>

Merge pull request #64196 from idryomov/wip-71838-squid

squid: librbd/migration/QCOWFormat: don't complete read_clusters() inline

Reviewed-by: Ramana Raja <rraja@redhat.com>

Merge pull request #64092 from idryomov/wip-70951-squid

squid: rbd-mirror: release lock before calling m_async_op_tracker.finish_op()

Reviewed-by: VinayBhaskar-V <vvarada@redhat.com>

Merge pull request #64097 from idryomov/wip-71335-squid

squid: librbd/cache/pwl: fix memory leak in SyncPoint persist context cleanup

Reviewed-by: Ramana Raja <rraja@redhat.com>

Merge pull request #64113 from zdover23/wip-doc-2025-06-23-backport-64103-to-squid

squid: doc/radosgw: improve "pubsub_push_pending" info

Reviewed-by: Yuval Lifshitz <ylifshit@ibm.com>
Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

common/options: fix typo in description

Signed-off-by: Lorenz Bausch <info@lorenzbausch.de>
(cherry picked from commit aa54c08eb01efa4f048cc8fba9f909e0226ac905)

rgw: make keystone work without admin token(service ac requirement)

Ceph RGW admin credentials must not be a requirement.
Both ec2 auth and keystone token validation work without an admin token.

And the user token verification will use its own token. The only
requirement for the service admin user token is the allow_expired, but
in our case we don't use this parameter.

fixes: https://tracker.ceph.com/issues/68327

Co-authored-by: @kayrus
Signed-off-by: Deepika Upadhyay <deepika.upadhyay@clyso.com>
(cherry picked from commit 55ce1782e159190fd9202b6e270a1a2c470b0626)

librbd/migration/QCOWFormat: don't complete read_clusters() inline

When the cluster needs to be read, the completion is posted to ASIO.
However, in the two special cases (cluster DNE and zero cluster), the
completion is completed inline at the moment.  This violates invariants
and can eventually lead to a lockup.  For example, in a scenario of
a read from a clone image whose parent is under migration:

  io::ObjectReadRequest::read_parent()
    io::util::read_parent()
      < image_lock is taken for read >
      io::ImageDispatchSpec::send()
        migration::ImageDispatch::read()
          migration::QCOWFormat::ReadRequest::send()
            ...
            migration::QCOWFormat::ReadRequest::read_clusters()
              < cluster DNE >
              migration::QCOWFormat::ReadRequest::handle_read_clusters()
                io::AioCompletion::complete()
                  io::ObjectReadRequest::copyup()
                    is_copy_on_read()
                      < image_lock is taken for read >

copyup() expects to be called with no locks held, but going through
QCOWFormat in the "cluster DNE" case essentially maintains image_lock
taken in read_parent() and then it's taken again by the same thread in
is_copy_on_read().  Under pthreads, it's not a problem:

  A thread may hold multiple concurrent read locks on rwlock (that is,
  successfully call the pthread_rwlock_rdlock() function n times). If
  so, the thread must perform matching unlocks (that is, it must call
  the pthread_rwlock_unlock() function n times).

But according to C++ standard it's undefined behavior:

  If lock_shared is called by a thread that already owns the mutex in
  any mode (exclusive or shared), the behavior is undefined.

Other, longer and more elaborate, call chains are possible too and
there it may end up being a write lock, a tripped assertion, etc.  To
avoid this, make the special cases in read_clusters() behave the same
as the main path.

Fixes: https://tracker.ceph.com/issues/71838
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
(cherry picked from commit a02cc13191d5e695620791c883ff1460d2e42f57)

librbd/migration/QCOWFormat: rename handle_read_cluster()

... to handle_read_clusters() as it's a callback for read_clusters().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
(cherry picked from commit 9d9c73435341f98cecf0a450357408f8d49624fa)

Merge pull request #64155 from zdover23/wip-doc-2025-06-25-backport-64107-to-squid

squid: doc/radosgw: remove "pubsub_event_triggered"

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>
Reviewed-by: Yuval Lifshitz <ylifshit@ibm.com>

Merge pull request #64132 from afreen23/wip-71808-squid

squid: mgr/dashboard: Add --force flag for listeners

Reviewed-by: Aashish Sharma <aasharma@redhat.com>

doc: Fix unterminated inline literal in ceph-conf.rst

Add missing space after closing backticks to properly terminate inline literal.

Sphinx was generating a warning due to an unterminated inline literal
string:

```
/home/kefu/dev/ceph/doc/rados/configuration/ceph-conf.rst:320: WARNING: Inline literal start-string without end-string.
```

This fix ensures the inline literal is properly closed and eliminates the
build warning.

Signed-off-by: Kefu Chai <tchaikov@gmail.com>
(cherry picked from commit 7f79f3d6aa7f71c9b2434b843036a3f1da660231)

mgr/dashboard: Add --force flag for listeners

Fixes https://tracker.ceph.com/issues/71685

Signed-off-by: Afreen Misbah <afreen@ibm.com>
(cherry picked from commit 604d351a4e7bbf47baf57e10f67219a2eea919e0)

Conflicts:
        src/pybind/mgr/dashboard/frontend/src/app/shared/api/nvmeof.service.ts
        src/pybind/mgr/dashboard/frontend/src/app/ceph/block/nvmeof-listeners-list/nvmeof-listeners-list.component.ts

doc/dev/config: Document how to use :confval: directive for config options

Add comprehensive guide for documenting configuration options using the
:confval: directive, including naming conventions and cross-referencing.

Previously, the documentation lacked guidance on using the :confval:
directive and the important distinction between regular config options
and mgr module options (which require the mgr/<module>/ namespace
prefix). This change provides detailed examples and best practices for
properly documenting and referencing both types of configuration options.

Signed-off-by: Kefu Chai <tchaikov@gmail.com>
(cherry picked from commit d61f9fffac0a1a0c18cbba89e8c43f469ee55c44)

Merge pull request #64049 from cbodley/wip-71751-squid

squid: fix: the RGW crash caused by special characters

Reviewed-by: Adam Emerson <aemerson@redhat.com>

Merge pull request #63928 from cbodley/wip-71671-squid

squid: qa/rgw: bump maven version in hadoop task to resolve 404 Not Found

Reviewed-by: Adam Emerson <aemerson@redhat.com>

Merge pull request #61162 from ivancich/wip-69182-squid

squid: Revert "rgw/auth: Fix the return code returned by AuthStrategy,"

Reviewed-by: Adam Emerson <aemerson@redhat.com>

doc/radosgw: remove "pubsub_event_triggered"

Remove "pubsub_event_triggered" from the list of "Notification
Performance Statistics". It is obsolete.

Fixes: https://tracker.ceph.com/issues/71789
Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 44dc57fc15749583fc13560c9409b7687df7c223)

doc: Fixed a spelling error.

Corrected communicte to communicate

Signed-off-by: Instelligence.io <github@instelligence.io>
(cherry picked from commit c328902e3929d9841f952948b0336ec5b20d36fa)

Merge pull request #64139 from zdover23/wip-doc-2025-06-25-backport-64106-to-squid

squid: doc/radosgw: add "persistent_topic_size"

Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

Merge pull request #64126 from zdover23/wip-doc-2025-06-24-backport-64104-to-squid

squid: doc/radosgw: remove "pubsub_event_lost"

Reviewed-by: Yuval Lifshitz <ylifshit@ibm.com>
Reviewed-by: Anthony D'Atri <anthony.datri@gmail.com>

doc/radosgw: add "persistent_topic_size"

Add "persistent_topic_size" to the list of "Notification Performance
Statistics" in doc/radosgw/notifications.rst.

Fixes: https://tracker.ceph.com/issues/71792
Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit 5f96ade1734d1ab7053b792a1df4e316e31691a5)

qa: fix test_cephfs_mirror_stats failure

* Don't create huge files that results in 'No space left on device'.
* Relax last_synced_end > last_synced_start check, so that
  the test wouldn't fail even if 'counter dump' delays getting updated
  values within a particular snapshot sync.

Fixes: https://tracker.ceph.com/issues/71186
Signed-off-by: Jos Collin <jcollin@redhat.com>
(cherry picked from commit 9738b8d36275fda42d847058aab55ba1e6e6e7fc)

qa: fix test_cephfs_mirror_stats failure

100MB files would take less than a second to sync, which makes no difference
in 'last_synced_end' and the test fails intermittently. We need to increase the
size of the files, as the time/duration is determined only in seconds.
Because of this, it also needs more sleep time before checking the status.

Fixes: https://tracker.ceph.com/issues/69232
Signed-off-by: Jos Collin <jcollin@redhat.com>
(cherry picked from commit 005e492288b71c641f33396cc8b13cc53d52b478)

qa: do the set/get attribute on the remote filesystem

Fixes: https://tracker.ceph.com/issues/67435
Signed-off-by: Jos Collin <jcollin@redhat.com>
(cherry picked from commit 9a46c52387fbdce580dd50584f9ea01469de6d51)

Merge pull request #63718 from NitzanMordhai/wip-71542-squid

squid: qa/suites: wait longer before stopping OSDs with valgrind

doc/radosgw: remove "pubsub_event_lost"

Remove "pubsub_event_lost" from the list of "Notification Performance
Statistics" in doc/radosgw/notifications.rst. "pubsub_event_lost" is now
obsolete.

Fixes: https://tracker.ceph.com/issues/71790
Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit b308f50d1e0c2d238c3b2bf54df99cc7ac2ac679)

Merge pull request #63154 from NitzanMordhai/wip-71224-squid

squid: osd_types: Restore new_object marking for delete missing entries